Jual Insertion Flowmeter

Jual flow Meter Isertion
CaliberDN100-DN3000mm
Flow rate0.1~10m/s
Accuracy0.5~10m/s:±1.5%FS;0.1~0.5m/s:±2.0%FS    0.1~10m/s:±2.5%FS(FS refers to 40%~100% of the full scale flow )
Conductivity>50μs/cm
Length of straight pipeUpstream 5D, downstream 3D
Medium temperature-20℃~/+130℃
Environment temperature-20℃~/+60℃
Pressure1.6MPa
Protection classIP65(Integrate),IP68(Remote)
Electrode materialSUS316L
Output signal4-20Ma ,RS485,HART,Modbus
Sensor materialStainless steel
Power220V/24V
Connection codeFlange type ,thread type
Ex-proof MarkExmd‖T4

Measurement is undependable of fluid densityviscosity humidity temperature pressure and conductivity.

The high reliable out-insertion installing mode with which the sensor can be installed
without removing the measuring pipe makes the flowmeter particularly applicable in field where the water can not be cut off for long.In addition it can be equipped on the old pipe with locale hatching